Vauxhall Insignia 2.0 2009 (diesel) - Wishbones and Suspension Arms

Wishbone and Suspension arms represent the not so obvious but most common wearing part on any vehicle. Sometimes it’s a wiser choice to replace a complete arm as the problem bush may be too difficult to remove and replace, and often require a hydraulic press. At Motortparts.ie we carry an extensive range of wishbones along with front and rear suspension arms and joints.

Suspension parts, rubber mounts such as bushings rank among the most vulnerable automotive components on your [make Insignia. They’re designed to absorb the high loads occurring during acceleration, braking, cornering and going over road bumps and potholes to stabilise the control arm and therefore are subject to critical levels of strain.

A faulty rubber mount will normally result in a knock-on-effect and will transfer the impact along to other components on the chassis, therefore an inspection of the undercarriage would be wise at each service interval.

We supply high quality suspension components from manufacturers such as SWAG, Quinton Hazel, Meyle and others.

Category image for Wishbones and Suspension Arms

Sort By

Product Results

First Line Track Control Arm (Rear Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237398 SUSPENSION ARM-VAUXHALL INSIGNI supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €66.08

€52.87

View Product

First Line Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2240138 TIE ROD END-VAUX INSIGNIA 08- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €24.38

€21.45

View Product

First Line Track Control Arm (Rear Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237420 SUSPENSION ARM-GM INSIGNIA A 20 supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €33.63

€27.58

View Product

First Line Track Control Arm (Rear Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237399 SUSPENSION ARM-VAUXHALL INSIGNI supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €66.08

€52.87

View Product

First Line Stabiliser Link (Rear Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237819 STABILISER LINK-VAUXHALL INSIGN supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €25.61

€21.77

View Product

First Line Track Control Arm (Rear Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237316 SUSPENSION ARM-VAUXHALL INSIGNI supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €124.60

€97.18

View Product

First Line Track Control Arm (Rear Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237315 SUSPENSION ARM-VAUXHALL INSIGNI supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €124.60

€97.18

View Product

First Line Track Control Arm (Front Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237062 SUSPENSION ARM-GM INSIGNIA 08- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €187.23

€142.30

View Product

First Line Track Control Arm (Front Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237061 SUSPENSION ARM-GM INSIGNIA 08- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €187.23

€142.30

View Product

First Line Ball Joint (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2236283 BALL JOINT-GM ASTRA GTC 2011- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Ball Joint fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €34.74

€28.49

View Product

First Line Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237840 STABILISER LINK-VAUXHALL INSIGN supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €27.38

€23.27

View Product

First Line Tie Rod (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2240158 RACK END-VAUXHALL INSIGNIA 2008 supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €30.06

€25.55

View Product

First Line Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237810 STABILISER LINK-VAUXHALL INSIGN supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €26.62

€22.62

View Product

First Line Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2240195 TIE ROD END-GM ASTRA 09/09- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €29.54

€25.12

View Product

First Line Tie Rod (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2240364 RACK END-VAUXHALL INSIGNIA 2008 supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €21.48

€18.89

View Product

First Line Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U2237809 STABILISER LINK-VAUXHALL INSIGN supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €25.66

€21.81

View Product

Delphi Tie Rod (Front Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1105445 DELPHI: Inner Tie Rod Opel Insignia supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod Axle Joint
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering/With hydraulic power steering
Fitment	325
Model Detail	40
Part Note	40
	M16x1.5
	M18x1.5

RRP: €23.62

€19.36

View Product

Delphi Tie Rod End (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1105495 DELPHI: Tie Rod End Chevrolet/Opel supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electro-hydraulic steering
Fitment	144
Model Detail	44
Part Note	122
	M16x1.5
	13

RRP: €27.70

€22.72

View Product

Delphi Tie Rod End (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1105572 DELPHI: Tie Rod End Chevrolet/Opel supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
IMPORT	With electric power steering
Fitment	136
Model Detail	40
Part Note	113
	M16x1.5
	13,2

RRP: €36.80

€30.17

View Product

Delphi Stabiliser Link (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1106800 DELPHI: Stabiliser link Bar Opel supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	With FlexRide suspension
OE No	Coupling Rod
Fitment	303
Model Detail	35
Part Note	116
	Metal
	M12x1.75

RRP: €46.20

€37.88

View Product

Delphi Stabiliser Link (Rear)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1106801 DELPHI: Stabiliser link Bar Opel supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
OE No	Coupling Rod
Fitment	71
Model Detail	31
Part Note	65
	M10x1.5

RRP: €40.76

€33.42

View Product

Delphi Stabiliser Link (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1107068 DELPHI: Link Stabiliser Chev/Opel/Saab supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DT
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTJ
BHP	128
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Rod/Strut
Engine Code	A20DTH
BHP	158
IMPORT	Without FlexRide suspension, Chemical Properties:Plastic
OE No	Coupling Rod
Fitment	304
Model Detail	38
Part Note	68
	M12x1.75

RRP: €27.40

€23.30

View Product

Delphi Track Control Arm (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1107211 DELPHI: Lower Wishbone Opel Insignia supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

RRP: €206.37

€154.78

View Product

Delphi Track Control Arm (Front Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1107212 DELPHI: Lower Wishbone Opel Insignia supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Delphi Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
IMPORT	Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4
Part Detail	with ball joint
OE No	Trailing Arm
Fitment	395
Model Detail	380
Part Note	82
	Aluminium
	Pinch Bolt 20mm

RRP: €206.37

€154.78

View Product

Meyle Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813155 MEYLE TIE ROD END - HEAVY DUTY RANGE supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTJ
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DT
Chassis Note	128
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Tie Rod End
Model Years	A20DTH
Chassis Note	158
	replacement in pairs recommended, with environmental seal
	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
	L: 115
	Thread Size 1: M12x1.75, Thread Size 2: M16x1.5

RRP: €36.16

€27.85

View Product

Meyle Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813210 MEYLE STABILIZER LINK supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, Spanner Attachment
Part Note	MEYLE-ORIGINAL: True to OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0882

RRP: €21.53

€17.65

View Product

Meyle Stabiliser Link (Rear Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1815041 Stabilizer link supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 72
Thread Type/Size	Thread Size: 10x1.5
Trade No	MSL0692

RRP: €31.76

€27.00

View Product

Meyle Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813201 MEYLE STABILISER LINK - HEAVY DUTY RANGE supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Stabiliser Link
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal, Spanner Attachment
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Req. Qty: 2, Rod/Strut: Coupling Rod
Shock Type	L: 300
Thread Type/Size	Thread Size 1: M12X1.5, Thread Size 2: M12X1.5
Trade No	MSL0518HD

RRP: €26.25

€21.00

View Product

Meyle Track Control Arm (Front Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813191 MEYLE CONTROL ARM supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0016
No of Teeth	replacement in pairs recommended, With rubber mount
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium, Req. Qty: 1
Trade No	MCA0690

RRP: €238.77

€179.08

View Product

Meyle Tie Rod (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813185 MEYLE AXIAL ROD - HEAVY DUTY RANGE supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended, with environmental seal
Part Note	Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0535HD

RRP: €31.76

€25.41

View Product

Meyle Tie Rod (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813180 MEYLE AXIAL ROD GM supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 315
Thread Type/Size	Thread Size 1: M16x1.5, Thread Size 2: M16x1.5
Trade No	MAR0330

RRP: €36.01

€27.74

View Product

Meyle Tie Rod (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813178 MEYLE AXIAL ROD supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Tie Rod fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTJ
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DT
BHP	128
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Tie Rod End
Engine Code	A20DTH
BHP	158
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Req. Qty: 2
Shock Type	L: 308
Thread Type/Size	Thread Size 1: M18x1.5, Thread Size 2: M16x1.5
Trade No	MAR0325

RRP: €22.61

€18.08

View Product

Meyle Track Control Arm (Rear Upper Outer Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Product code: U1813854 MEYLE Control arm supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

This Meyle Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13
Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0040
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1244

RRP: €73.92

€59.14

View Product

Meyle Track Control Arm (Rear Upper Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Product code: U1813853 MEYLE Control arm supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

This Meyle Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13
Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTJ
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 130 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DT
BHP	128
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

Insignia 2.0 CDTi 160 (2008-2014) 11/08-07/13

Description	Track Control Arm
Engine Code	A20DTH
BHP	158
Air Con Note	Paired with: 616 050 0041
Brake Note	-->D1999999
No of Teeth	replacement in pairs recommended
Part Note	MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel, Req. Qty: 1
Trade No	MCA1243

RRP: €73.92

€59.14

View Product

Blue Print Stabiliser Link (Rear Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Product code: U1212707 STABILISER LINK - supplier image

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

This Blue Print Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17
Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17
Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DT
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTJ
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DT
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DT
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DT
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DT
Model Code	128
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with nut
Engine Code	A20DTH
Model Code	158
Note 3	Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5
Note 4	Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RRP: €25.14

€22.13

View Product

Blue Print Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Product code: U1212712 Tie Rod End SPECIAL ORDER PART supplier image

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

This Blue Print Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17
Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17
Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DT
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTJ
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DT
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DT
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DT
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DT
Model Code	128
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with lock nut and nut
Engine Code	A20DTH
Model Code	158
From VIN No	Vehicle Equipment:for vehicles with hydraulic power steering
Note 3	Length[mm]:120
Note 6	Front axle left; Front axle right

RRP: €31.68

€26.25

View Product

Blue Print Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Product code: U2207432 OUTER TRACK ROD END OPEL ASTRA 09-15 VAUXHALL ASTR - supplier image

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

This Blue Print Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17
Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17
Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DT
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DT
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTJ
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DT
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DT
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DT
Model Code	128
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Tie Rod End with nut
Engine Code	A20DTH
Model Code	158
Sizes	for LHD and RHD
From VIN No	Vehicle Equipment:for vehicles with electric power steering, for POC:NJ0/NJ1
Note 3	Height[mm]:51.3,Length[mm]:120
Note 6	Front axle left; Front axle right

RRP: €26.32

€22.37

View Product

Blue Print Stabiliser Link (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Product code: U2207363 STABILISER LINK CHEVROLET CRUZE 12-15 OPEL ASTRA 0 - supplier image

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

This Blue Print Stabiliser Link fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17
Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17
Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DT
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DT
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTJ
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DT
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DT
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 130 (2013-2017) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DT
Model Code	128
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

Insignia 2.0 CDTi 160 (2008-2014) 07/08-05/17

Description	Stabiliser Link with lock nuts
Engine Code	A20DTH
Model Code	158
From VIN No	Suspension:for vehicles without FlexRide suspension
Note 3	Height[mm]:67,Width[mm]:29,Length[mm]:304
Note 4	Material:Plastic
Note 6	Front axle left; Front axle right

RRP: €23.91

€21.05

View Product

Auto Electrical

BATTERIES

Body Repair

CAR ACCESSORIES

Car Bulbs

CAR CARE

EMERGENCY

MIRRORS

POPULAR BRANDS

PROMOTIONS

ROOF RACKS & BOXES

TECHNICAL

TRAILER ACCESSORIES

WHEEL PRODUCTS

WORKSHOP

Body & Trim

Brake Friction

Cables

Clutch Friction

Cooling & Heating

Electrical

Engine Parts

Exhausts

Filters & Ignition

Fitting Tools

Flexible Mountings

Fuel & Engine Management

Hydraulics

Lighting

Lubricants & Fluids

Publications

Service Parts

Steering & Suspension

Transmission

Wipers

Air Power Tools

Bodyshop Tools

Garage & Workshop

Hand Tools

Jack Lift & Towing

Janitorial & Environ

Lighting & Power

Vehicle Service Tool

Your Vehicle

Refine Products

Trans

Model

Description

Brands

Position

Steering & Suspension > Wishbones and Suspension Arms

Product Results

First Line Track Control Arm (Rear Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Track Control Arm fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

First Line Tie Rod End (Front Left Hand+Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This First Line Tie Rod End fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14