My Car > Vauxhall Insignia 2.0 2009 (diesel)
Your Vehicle
Refine Products
Model
Brands
Steering & Suspension > Steering Boxes, Pumps
Product Results
Elstock PAS Pump
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Product code: U1180692 STEERING PUMP OPEL Insignia A 2.0 CDTI
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
This Elstock PAS Pump fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Please note: this Elstock PAS Pump has a surcharge of €79.95.
If you return your old PAS Pump the surcharge will be refunded.
If you return your old PAS Pump the surcharge will be refunded.
DRI PAS Pump
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Product code: U1174665 POWER STEERING PUMP Opel Insign
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
This DRI PAS Pump fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DT |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTJ |
| Engine Code | 128 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Fitment | Steering Parts |
|---|---|
| Chassis Note | A20DTH |
| Engine Code | 158 |
| Engine Note | Operating Mode: Hydraulic |
| OE System | Manufacturer: Toyoda |
| Part Note 2 | Manufac. Restrict.: Pulley Height 103mm |
| Note 2 | Belt Pulley Dia.: 119,0 mm |
| Note 3 | Number of Ribs: 6 |
| Note 5 | Pressure: 120BAR |
Please note: this DRI PAS Pump has a surcharge of €61.50.
If you return your old PAS Pump the surcharge will be refunded.
If you return your old PAS Pump the surcharge will be refunded.