Your Vehicle
Refine Products
Trans
Model
Description
Brands
Position
Steering & Suspension > Steering & Susp. Components
Product Results
First Line Stabiliser Link (Rear Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/14
Product code: U2237819 STABILISER LINK-VAUXHALL INSIGN
Insignia 2.0 T (2008-2014) 11/08-12/14
This First Line Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Rear Left Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237315 SUSPENSION ARM-VAUXHALL INSIGNI
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2240364 RACK END-VAUXHALL INSIGNIA 2008
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Tie Rod End (Front Left Hand+Right Hand, Front)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2240195 TIE ROD END-GM ASTRA 09/09-
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Tie Rod End fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2240158 RACK END-VAUXHALL INSIGNIA 2008
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237840 STABILISER LINK-VAUXHALL INSIGN
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237810 STABILISER LINK-VAUXHALL INSIGN
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237809 STABILISER LINK-VAUXHALL INSIGN
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Rear Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237420 SUSPENSION ARM-GM INSIGNIA A 20
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Rear Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237399 SUSPENSION ARM-VAUXHALL INSIGNI
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Rear Left Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237398 SUSPENSION ARM-VAUXHALL INSIGNI
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Rear Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237316 SUSPENSION ARM-VAUXHALL INSIGNI
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Tie Rod End (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2240138 TIE ROD END-VAUX INSIGNIA 08-
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Tie Rod End fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Front Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237062 SUSPENSION ARM-GM INSIGNIA 08-
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Track Control Arm (Front Left Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2237061 SUSPENSION ARM-GM INSIGNIA 08-
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
First Line Ball Joint (Front)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U2236283 BALL JOINT-GM ASTRA GTC 2011-
Insignia 2.0 T (2008-2014) 11/08-04/12
This First Line Ball Joint fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/10
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
Delphi Track Control Arm (Rear Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U2266523 SUSPENSION ARM (RH)
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Delphi Track Control Arm (Rear Left Hand)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U2266522 SUSPENSION ARM (LH)
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, ->Ch.D1999999 |
| Part Detail | without ball joint |
| OE No | Control Arm |
| Fitment | 445 |
| Model Detail | 125 |
| Part Note | 55 |
| Cast Steel |
Delphi Suspension Arm (Rear)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U2266299 Opel Vauxhall Track Control Arm
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Suspension Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Wheel Suspension Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Front, Lower |
| OE No | Camber Link |
| Fitment | 270 |
| Model Detail | 66 |
| Part Note | 47 |
| Bush 12.3mm, Bush 14.3mm |
Delphi Ball Joint (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U2266172 Lower Ball Joint Saab Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Ball Joint fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, GNB |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, GNB |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, GNB |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, GNB |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Outer, Upper, GNB |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Ball Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Fitment | 144 |
| Model Detail | 97 |
| Part Note | 63 |
| M16 x 2 x 28 |
Delphi Track Control Arm (Front Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1107212 Lower Wishbone Opel Insignia
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, ->Ch.B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, ->Ch.B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Delphi Track Control Arm (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1107211 Lower Wishbone Opel Insignia
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, ->Ch.B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, ->Ch.B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.B1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:GNA/XJ2/XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Lower, Outer, Ch.C1000001->B1999999, With heavy duty suspension/With lowered suspension/With sports suspension/With standard suspension, For POC:XJ2/XJ6/XL4 |
| Part Detail | with ball joint |
| OE No | Control Arm |
| Fitment | 395 |
| Model Detail | 380 |
| Part Note | 82 |
| Aluminium |
Delphi Stabiliser Link (Rear)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1107170 DELPHI: SPECIAL ORDER - Link Stabiliser Opel Insignia
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 237 |
| Model Detail | 44 |
| Part Note | 59 |
| M10x1.5 | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 237 |
| Model Detail | 44 |
| Part Note | 59 |
| M10x1.5 | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 237 |
| Model Detail | 44 |
| Part Note | 59 |
| M10x1.5 | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 237 |
| Model Detail | 44 |
| Part Note | 59 |
| M10x1.5 | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 237 |
| Model Detail | 44 |
| Part Note | 59 |
| M10x1.5 | |
| M10x1.5 |
Delphi Stabiliser Link (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1107068 Stabiliser Link Chev/Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | Without FlexRide suspension, Chemical Properties:Plastic |
| OE No | Coupling Rod |
| Fitment | 304 |
| Model Detail | 38 |
| Part Note | 68 |
| Plastic | |
| M12x1.75 | |
| M12x1.75 |
Delphi Stabiliser Link (Rear)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1106801 Stabiliser Link Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| OE No | Coupling Rod |
| Fitment | 71 |
| Model Detail | 31 |
| Part Note | 65 |
| Steel | |
| M10x1.5 |
Delphi Stabiliser Link (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1106800 Stabiliser Link Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With FlexRide suspension |
| OE No | Coupling Rod |
| Fitment | 303 |
| Model Detail | 35 |
| Part Note | 116 |
| Metal, Steel | |
| M12x1.75 | |
| M12x1.75 |
Delphi Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U2264835 Chevrolet Opel Vauxhall Inner Tie Rod
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering, For POC:NJ1 |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering, For POC:NJ1 |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering, For POC:NJ1 |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering, For POC:NJ1 |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering, For POC:NJ1 |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 329,2 |
| Model Detail | 40 |
| Part Note | 40 |
| 314 | |
| M16 x 1,5 | |
| M16 x 1.5 |
Delphi Tie Rod End (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1105572 Tie Rod End Chevrolet/Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Tie Rod End fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electric power steering |
| Fitment | 136 |
| Model Detail | 40 |
| Part Note | 113 |
| M16x1.5 | |
| 13,2 |
Delphi Tie Rod (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1105445 Inner Tie Rod Opel Insignia
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 325 |
| Model Detail | 40 |
| Part Note | 40 |
| M16x1.5 |
Delphi Tie Rod End (Front)
Insignia 2.0 T (2008-2014) 11/08-12/10
Product code: U1105495 Tie Rod End Chevrolet/Opel
Insignia 2.0 T (2008-2014) 11/08-12/10
This Delphi Tie Rod End fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| IMPORT | With electro-hydraulic steering |
| Fitment | 144 |
| Model Detail | 44 |
| Part Note | 122 |
| M16x1.5 | |
| 13 |
Meyle Tie Rod End (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813155 MEYLE TIE ROD END - HEAVY DUTY RANGE
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Tie Rod End fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Length mm | Tie Rod End |
|---|---|
| Model Years | A20NHT |
| Chassis Note | 217 |
| replacement in pairs recommended | |
| Reinforced Version, MEYLE-HD: Better than OE., Req. Qty: 2 | |
| L: 115 | |
| Thread Size 1: M12x1.75 | |
| MTE0484HD |
Meyle Track Control Arm (Rear Upper Outer Left Hand)
Insignia 2.0 T (2008-2014) 11/08-07/13
Product code: U1813854 MEYLE Control arm
Insignia 2.0 T (2008-2014) 11/08-07/13
This Meyle Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-07/13
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0040 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1244 |
Meyle Track Control Arm (Rear Upper Right Hand)
Insignia 2.0 T (2008-2014) 11/08-07/13
Product code: U1813853 MEYLE Control arm
Insignia 2.0 T (2008-2014) 11/08-07/13
This Meyle Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-07/13
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Insignia 2.0 T (2008-2014) 11/08-07/13
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0041 |
| Brake Note | -->D1999999 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Semi-Trailing Arm, Material: Steel |
| Payload | Required: 1 |
| Trade No | MCA1243 |
Meyle Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813178 MEYLE AXIAL ROD
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0325 |
Meyle Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813180 MEYLE AXIAL ROD GM
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE. |
| Payload | Required: 2 |
| Shock Type | L: 315 |
| Trade No | MAR0330 |
Meyle Tie Rod (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813185 MEYLE AXIAL ROD - HEAVY DUTY RANGE
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Tie Rod fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE. |
| Payload | Required: 2 |
| Shock Type | L: 308 |
| Trade No | MAR0535HD |
Meyle Track Control Arm (Front Left Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813191 MEYLE CONTROL ARM
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Track Control Arm fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Track Control Arm |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Air Con Note | Paired with: 616 050 0016 |
| Chassis No | GNA |
| Material Type | replacement in pairs recommended, With ball joint, With rubber mount |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Control/Trailing Arm Type: Control Arm, Material: Aluminium |
| Payload | Required: 1 |
| Trade No | MCA0690 |
Meyle Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813201 MEYLE STABILISER LINK - HEAVY DUTY RANGE
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | Reinforced Version, MEYLE-HD: Better than OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0518HD |
Meyle Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-04/12
Product code: U1813210 MEYLE STABILIZER LINK
Insignia 2.0 T (2008-2014) 11/08-04/12
This Meyle Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-04/12
- Insignia 2.0 T (2008-2014) 11/08-12/10
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-04/12
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/10
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended, Spanner Attachment |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Material: Steel, Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 300 |
| Thread Type/Size | Thread Size 1: M12x1.5 |
| Trade No | MSL0882 |
Meyle Stabiliser Link (Rear Left Hand+Right Hand)
Insignia 2.0 T (2008-2014) 11/08-12/14
Product code: U1815041 Stabilizer link
Insignia 2.0 T (2008-2014) 11/08-12/14
This Meyle Stabiliser Link fits the following vehicles
- Insignia 2.0 T (2008-2014) 11/08-12/14
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Insignia 2.0 T (2008-2014) 11/08-12/14
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| BHP | 217 |
| Material Type | replacement in pairs recommended |
| No of Teeth | MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod |
| Payload | Required: 2 |
| Shock Type | L: 72 |
| Trade No | MSL0692 |
Blue Print Tie Rod End (Front Left Hand+Right Hand)
Insignia 2.0 (2013-2017) 01/09-05/17
Product code: U2207432 OUTER TRACK ROD END OPEL ASTRA 09-15 VAUXHALL ASTR -
Insignia 2.0 (2013-2017) 01/09-05/17
This Blue Print Tie Rod End fits the following vehicles
- Insignia 2.0 (2013-2017) 01/09-05/17
- Insignia 2.0 T (2008-2014) 01/09-05/17
- Insignia 2.0 T (2008-2014) 07/08-06/11
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| To VIN No | for POC:NJ0/NJ1, Vehicle Equipment:for vehicles with electric power steering |
| Note 3 | Height[mm]:51.3,Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Blue Print Tie Rod End (Front Left Hand+Right Hand)
Insignia 2.0 (2013-2017) 01/09-05/17
Product code: U1212712 Tie Rod End SPECIAL ORDER PART
Insignia 2.0 (2013-2017) 01/09-05/17
This Blue Print Tie Rod End fits the following vehicles
- Insignia 2.0 (2013-2017) 01/09-05/17
- Insignia 2.0 T (2008-2014) 01/09-05/17
- Insignia 2.0 T (2008-2014) 07/08-06/11
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Tie Rod End |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut and nut |
| To VIN No | Vehicle Equipment:for vehicles with hydraulic power steering |
| Note 3 | Length[mm]:120 |
| Note 6 | Front Axle Left; Front Axle Right |
Blue Print Stabiliser Link (Rear Left Hand+Right Hand)
Insignia 2.0 (2013-2017) 01/09-05/17
Product code: U1212707 STABILISER LINK -
Insignia 2.0 (2013-2017) 01/09-05/17
This Blue Print Stabiliser Link fits the following vehicles
- Insignia 2.0 (2013-2017) 01/09-05/17
- Insignia 2.0 T (2008-2014) 01/09-05/17
- Insignia 2.0 T (2008-2014) 07/08-06/11
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nut |
| Note 3 | Outer Dia.[mm]:12,Height[mm]:83,Length[mm]:102.5 |
| Note 4 | Material:steel |
| Note 6 | Rear Axle Left; Rear Axle Right |
Blue Print Stabiliser Link (Front Left Hand+Right Hand)
Insignia 2.0 (2013-2017) 01/09-05/17
Product code: U2207363 STABILISER LINK CHEVROLET CRUZE 12-15 OPEL ASTRA 0 -
Insignia 2.0 (2013-2017) 01/09-05/17
This Blue Print Stabiliser Link fits the following vehicles
- Insignia 2.0 (2013-2017) 01/09-05/17
- Insignia 2.0 T (2008-2014) 01/09-05/17
- Insignia 2.0 T (2008-2014) 07/08-06/11
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 (2013-2017) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | B20NHT |
| Model Code | 246 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 01/09-05/17
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NFT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |
Insignia 2.0 T (2008-2014) 07/08-06/11
| Description | Stabiliser Link |
|---|---|
| Engine Code | A20NHT |
| Model Code | 217 |
| Sizes | with lock nuts |
| To VIN No | Suspension:for vehicles without FlexRide suspension |
| Note 3 | Height[mm]:67,Width[mm]:29,Length[mm]:304 |
| Note 4 | Material:Plastic |
| Note 6 | Front Axle Left; Front Axle Right |

