Vauxhall Insignia 2.0 2009 (diesel)

It's important to replace both shock absorbers on an axle at the same time. It is important not just for the stability of your Vauxhall Insignia, the older strut will not last long as the weight of the vehicle will tilt to the weaker side. We supply premium quality shock absorbers with the lowest possible prices.

Longer braking distances, poor road holding when cornering and limited performance of state-of-the-art driver assisted systems such as ABS, ESP or TCS are some of the major safety risks resulting from defective shock absorbers. Ensure these safety-critical components continue to perform reliably as shocks absorbers keep the car wheels on the ground and absorb the energy from the coil spring to maintain a springy suspension and better handling as well as traction control.

Sort By

Product Results

Meyle Shock Absorber (Front Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813237 MEYLE SHOCK FRONT L/H supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0023, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

RRP: €109.67

€82.25

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Meyle Shock Absorber (Front Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813238 MEYLE SHOCK FRONT R/H supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Paired with: 626 623 0022, Recommended accessories: 614 640 0011, 614 641 0010
BHP	-->D1999999
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Top pin
	Gas Pressure, Design: Suspension Strut, System: Twin-Tube

RRP: €109.67

€82.25

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Meyle Shock Absorber (Rear)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813259 MEYLE SHOCK REAR supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
BHP	-->D1999999
	replacement in pairs recommended, Without suspension strut support mount
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

RRP: €69.22

€51.92

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Meyle Shock Absorber (Rear)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1813260 MEYLE SHOCK REAR supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DT
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTJ
Chassis Note	128
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Length mm	Shock Absorber
Model Years	A20DTH
Chassis Note	158
Part Notes	Recommended accessories: 614 740 0001
	replacement in pairs recommended
	MEYLE-ORIGINAL: True to OE., Shock absorber mount. type: Bottom eye, Top pin
	Gas Pressure, Design: Telescopic Shock Absorber, System: Twin-Tube

RRP: €80.59

€60.44

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

KYB Accessory Kit (Rear)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1307422 SHOCK PROTECTION KIT-Vauxhall Insignia(R) supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This KYB Accessory Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
IMPORT	0

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
IMPORT	0

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
IMPORT	0

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
IMPORT	0

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
IMPORT	0

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Protection Kit
Mounting Kit	SM5651 / SM5652
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
IMPORT	0

RRP: €36.29

€29.03

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

KYB Mounting Kit (Rear Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1310752 STRUT MTG-Vauxhall Insignia(R)RH supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This KYB Mounting Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

RRP: €76.11

€60.89

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

KYB Mounting Kit (Rear Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1310753 STRUT MTG-Vauxhall Insignia-(R)LH supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This KYB Mounting Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Suspension Mounting Kit
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting only

RRP: €76.11

€60.89

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

KYB Mounting Kit (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Product code: U1310741 STRUT MTG-(F) INSIGNIA 08- supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

This KYB Mounting Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13
Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 130 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

Insignia 2.0 CDTi 160 (2008-2014) 11/09-07/13

Description	Suspension Mounting Kit
Axle Info	(VIN) to: D1999999
Standard/Heavy Duty/Sports	Standard / Sport
PDF Catalogue Link	http://www.kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Suspension mounting + separated bearing
Protection Kit	910176

RRP: €79.73

€61.39

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

KYB Shock Absorber (Rear)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1305778 SHOCK-Vauxhall Insignia - R supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This KYB Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DT
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTJ
BHP	128
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Description	Excel-G Shock Absorber
Mounting Kit	SM5651R / SM5652L
Applic Note	Excl Electric & Self-Levelling Suspension
Standard/Heavy Duty/Sports	Standard / Sport
End Fitting Type	Top Pin ; Bottom Eye
PDF Catalogue Link	http://kyb-europe.com/catalogue.asp
Engine Code	A20DTH
BHP	158
Part Note	Design: Twin-Tube (Gas Pressure)
Protection Kit	910206

RRP: €117.49

€90.47

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Optimal Accessory Kit (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1394508 Insignia '08-> Dust Cover Kit Shock Absorber Front supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Optimal Accessory Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €35.06

€25.94

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Optimal Accessory Kit (Front)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Product code: U1397980 Insignia '08-> Protective Cap/Bellow Shock Absorber Front For Vehicles With Uprated Suspension supplier image

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Optimal Accessory Kit fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

RRP: €8.61

€6.37

It is highly advisable to replace the Shock Absorber on both sides of an axle when replacing. View Product

Auto Electrical

BATTERIES

Body Repair

CAR ACCESSORIES

Car Bulbs

CAR CARE

EMERGENCY

MIRRORS

POPULAR BRANDS

PROMOTIONS

ROOF RACKS & BOXES

TECHNICAL

TRAILER ACCESSORIES

WHEEL PRODUCTS

WORKSHOP

Body & Trim

Brake Friction

Cables

Clutch Friction

Cooling & Heating

Electrical

Engine Parts

Exhausts

Filters & Ignition

Fitting Tools

Flexible Mountings

Fuel & Engine Management

Hydraulics

Lighting

Lubricants & Fluids

Publications

Service Parts

Steering & Suspension

Transmission

Wipers

Air Power Tools

Bodyshop Tools

Garage & Workshop

Hand Tools

Jack Lift & Towing

Janitorial & Environ

Lighting & Power

Vehicle Service Tool

Your Vehicle

Refine Products

Model

Description

Brands

Position

Steering & Suspension > Shock Absorbers

Product Results

Meyle Shock Absorber (Front Left Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14

Meyle Shock Absorber (Front Right Hand)

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

This Meyle Shock Absorber fits the following vehicles

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14

Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14